RADIANT QUARTZ HEATER
Main Page
List of Products
QUARTZ HEATER SPECIFICATIONS
| DIAMETER'S | : 3/8", 1/2", 5/8" |
| MAXIMUM LENGTH | : 80" |
| LENGTH TOLERANCE | : + or - 1/8" upto 12" |
| SCREW TERMINAL | : + or - 2 % above 12" |
| ELECTRICAL RESISTANCE | : + or - 10 % |
| WATTAGE TOLERANCE | : +or - 10 % |
| MAXIMUM VOLTS | : 480 volts when applicable |
| MAXIMUM AMPERAGE | : 20 amps when applicable |
| MAXIMUM WATT DENSITY | : 40 watts per /IN� |
STANDARD TERMINATION SIZES AND RATINGS
| Quartz Tube Diameter | Overall Length | Heated Length |
Watts | Volts | |
| 120 | 240 | ||||
| 3/8" | 14" | 12" | 480 | o | o |
| 20" | 18" | 720 | o | o | |
| 26" | 24" | 960 | o | o | |
| 38" | 36" | 1450 | o | o | |
| 48" | 46" | 1900 | o | o | |
| 1/2" | 18" | 16" | 900 | o | o |
| 20" | 18" | 900 | o | o | |
| 26" | 24" | 1200 | o | o | |
| 36" | 34" | 1800 | o | o | |
| 38" | 36" | 1800 | o | o | |
| 42" | 40" | 1580 | o | o | |
| 48" | 46" | 1820 | o | o | |
| 50" | 48" | 2400 | o | o | |
| 54" | 52" | 2060 | o | o | |
| 60" | 58" | 2300 | o | o | |
| 66" | 64" | 2540 | o | o | |
| 72" | 70" | 2780 | o | o | |
| 5/8" | 24" | 20" | 1075 | o | o |
| 26" | 24" | 1800 | o | o | |
| 30" | 28" | 1375 | o | o | |
| 38" | 36" | 2500 | o | o | |
| 42" | 40" | 1975 | o | o | |
| 48" | 46" | 2275 | o | o | |
| 50" | 48" | 3400 | o | o | |
| 54" | 52" | 2575 | o | o | |
| 60" | 58" | 2875 | o | o | |
| 62" | 60" | 4200 | o | o | |
| 66" | 64" | 3175 | o | o | |
| 72" | 70" | 3475 | o | o | |
PHP RADIANT QUARTZ HEATERS are one of the most efficient source of energy. QUARTZ HEATERS can deliver near and far infrared wave lengths which are more effective than a single wave length. capable of generating full heat output capacity in 40 to 50 seconds and cool in less than 15 seconds. They offer excellent life characteristics whether operated continuously or intermittently. For most efficient heating and longer operating life, quartz heating applications should be rated around 35 to 40 watts per square inch. Quartz heating elements do not give off an objectionable glare because of very low emission in the visible spectrum. Optimum design provides clear red colour on the translucent quartz tube when operating at full voltage, providing an infrared wave length at energy peak of 2.5 to 3 microns. The wave length is almost completely absorbed by the process, and considered best for most industrial applications.
They are primarily manufactured to the customers specifications. When your products or processing equipments require radiant energy, one of PHP’s standard quartz heaters may be the preferred answer to your needs. For a full range of standard physical dimensions, electrical range and a complete arrangement of screw terminals and lead terminals, ask for the details.
Designed & Created By : THE EDG.
Copyright � 1999 [Smart Designs]. All rights reserved.
Revised: April 16, 1999.